Precision Parts. Reliable Production. Built for Cabinet Shops and Industry Pros.
Featured Products
Custom Parts Cart
Features
Fully parametric in Mozaik — change dimensions/features and anything you want in the Parameters tab
Full instructions with photos on how to import into Mozaik
Full-depth bottom cubbies for stretchers or nailers
Divider Slots in the main part of the cart for sides, bottoms, tops, and doors
Rear Nook for 1/4" backers or bigger panels
Materials Used
6 sheets of 4×8 material
4" locking swivel casters, set of 4 with 1/4-20 x 1-1/4" long bolts with flathead tops
1/4-20 nylon lock nuts
GRK #8 x 1-1/2" R4™ star-drive flat head screws (137 screws total)
27 Lamello Tenso P-14 or Clamex P-14 connectors
Substitute
If Lamello Zeta P2 is not an option, you can use 18 Clamex S-20 connectors + 9 standard biscuits instead of Tenso/Clamex P-14.
Can also use a Domino of Biscuit Joiner
Tools for CNC:
3 mm drill bit (or equivalent in Imperial, this can be changed in the Parameters tab)
5 mm drill bit (or equivalent in Imperial, this can be changed in the Parameters tab)
6 mm drill bit (or equivalent in Imperial, this can be changed in the Parameters tab)
Cutout tool of choice
Other tools used:
Lamello Zeta P2 with positioning pins and a 6 mm alignment pin (Can shut off in Parameters if you don’t have a Lamello.
(The Lamello was used to secure the top of the cubbies to the bottom of the fixed shelf only)
Dimensions
Width 60”
Depth 33”
Height 40” (without the casters)
Cut Time: Roughly 1.5 hours but will vary on each machine, especially if you don’t have a drill block
Sanding Time: Depends on how fast the neighbor kid can do it
Assembly Time: Roughly 3 hours
Custom shop carts that securely hold cabinet parts and easily roll to your assembly area for convenient, organized workflow.
Custom Parts Cart DXF Only
Features
All the same features as the other parts cart with some added bonuses
Full instructions with photos on how to import
Notches and dados - Quicker and more accurate assembly. No more measuring, and no more jigs to ensure proper spacing, etc.
Improved machining - Minimizes vacuum loss by leaving an “onion skin” (0.012”/0.3048mm) for all features before performing through cuts to release parts from the stock (interior features, then parts profiling).
Improved divider geometry - Stronger dividers that also make placing parts quicker and easier.
Engraved slot numbering - Apply paint or colored epoxy to the numbers to quickly identify each assembly slot, along with the associated parts cubby below each assembly slot.
Branding - While files include Sublime Woodworks branding by default, your company branding can be substituted for a nominal upcharge ($25.00).
Added height - An extra inch has been added to the parts cubbies to accommodate taller parts along with full-depth cubbies for stretchers or nailers.
Rear Nook- For 1/4" backers or bigger panels
Weight Reduction - With the added cutouts cart weight was reduced by almost 60lbs.
Materials Used
6 sheets of 4×8 material
4" locking swivel casters, set of 4 with 1/4-20 x 1-1/4" long bolts with flathead tops
1/4-20 nylon lock nuts
GRK #8 x 1-1/2" R4™ star-drive flat head screws (137 screws total)
27 Lamello Tenso P-14 or Clamex P-14 connectors
Substitute
If Lamello Zeta P2 is not an option, you can use 18 Clamex S-20 connectors + 9 standard biscuits instead of Tenso/Clamex P-14.
Can also use a Domino of Biscuit Joiner
Tools Required
60° V-groove Bit
1/8” End Mill
3/8” Compression Bit
Other tools used
Lamello Zeta P2 with positioning pins and a 6 mm alignment pin (Can shut off in Parameters if you don’t have a Lamello.
(The Lamello was used to secure the top of the cubbies to the bottom of the fixed shelf only)
Dimensions
Width 60”
Depth 33.75”
Height 40”
Cut Time: Roughly 3.0 hours but will vary on each machine
Sanding Time: Depends on how fast the neighbor kid can do it
Assembly Time: Roughly 3 hours
Custom Parts Cart VCARVE PRO 12.5 ONLY (if you have older version use the DXF file instead)
Features
All the same features as the other parts cart with some added bonuses
Full instructions with photos on how to import
Notches and dados - Quicker and more accurate assembly. No more measuring, and no more jigs to ensure proper spacing, etc.
Improved machining - Minimizes vacuum loss by leaving an “onion skin” (0.012”/0.3048mm) for all features before performing through cuts to release parts from the stock (interior features, then parts profiling).
Improved divider geometry - Stronger dividers that also make placing parts quicker and easier.
Engraved slot numbering - Apply paint or colored epoxy to the numbers to quickly identify each assembly slot, along with the associated parts cubby below each assembly slot.
Branding - While files include Sublime Woodworks branding by default, your company branding can be substituted for a nominal upcharge ($25.00).
Added height - An extra inch has been added to the parts cubbies to accommodate taller parts along with full-depth cubbies for stretchers or nailers.
Rear Nook- For 1/4" backers or bigger panels
Weight Reduction - With the added cutouts cart weight was reduced by almost 60lbs.
Materials Used
6 sheets of 4×8 material
4" locking swivel casters, set of 4 with 1/4-20 x 1-1/4" long bolts with flathead tops
1/4-20 nylon lock nuts
GRK #8 x 1-1/2" R4™ star-drive flat head screws (137 screws total)
27 Lamello Tenso P-14 or Clamex P-14 connectors
Substitute
If Lamello Zeta P2 is not an option, you can use 18 Clamex S-20 connectors + 9 standard biscuits instead of Tenso/Clamex P-14.
Can also use a Domino of Biscuit Joiner
Tools Required
60° V-groove Bit
1/8” End Mill
3/8” Compression Bit
Other tools used:
Lamello Zeta P2 with positioning pins and a 6 mm alignment pin (Can shut off in Parameters if you don’t have a Lamello.
(The Lamello was used to secure the top of the cubbies to the bottom of the fixed shelf only)
Dimensions
Width 60”
Depth 33.75”
Height 40”
Cut Time: Roughly 3.0 hours but will vary on each machine
Sanding Time: Depends on how fast the neighbor kid can do it
Assembly Time: Roughly 3 hours
Our Services
-
Need reliable CNC processing and edge banding? We provide high-precision cutting and seamless edge banding to help cabinet shops streamline production. Whether you're a small shop looking for a dependable parts supplier or a large shop needing overflow support, we ensure accuracy, efficiency, and consistency.
✔️ Custom-cut cabinet parts, ready for assembly
✔️ Professional edge banding for a flawless finish
✔️ Reliable turnaround times to keep your projects on track -
For cabinet shops that prefer to assemble in-house, we offer high-quality, precisely cut flat-packed parts. Every order is labeled for easy identification, making the assembly process smooth and efficient.
✔️ Precision-cut cabinet components, ready to assemble
✔️ Organized, labeled parts for easy identification
✔️ Available for pickup at our facility -
Perfect for cabinet facelifts, new construction, or replacing worn-out doors and drawer fronts, our custom MDF doors provide a smooth, paint-ready surface for any project.
✔️ Ideal for cabinet refinishing & renovations
✔️ High-quality MDF for a flawless painted finish
✔️ Custom sizes and styles to match any design -
If you need fully assembled cabinets ready for installation, we’ve got you covered. We build to your specifications, ensuring that every cabinet is crafted with precision and delivered ready to install.
✔️ Professionally assembled cabinets, built to spec
✔️ Available for pickup
✔️ High-quality craftsmanship for seamless installations -
Beyond parts manufacturing, we also create fully custom cabinetry solutions. Whether you’re a contractor working on a high-end kitchen or a shop looking for specialty cabinets, we can design, build, and finish cabinetry to meet your exact needs.
✔️ Custom-built cabinetry for residential and commercial spaces
✔️ Designed to match any aesthetic or functional requirement
✔️ Built with top-tier materials and expert craftsmanship
About Sublime Woodworks
Built by Cabinetmakers, for Cabinet Shops
At Sublime Woodworks, we know how hard it is to find a reliable partner for CNC processing and edge banding. We’ve been in your position—searching for quality-cut parts, only to be met with long lead times, inconsistent results, or shops unwilling to help. That’s why we created Sublime Woodworks: to be the solution for shops and contractors who need precision, dependability, and flexibility.
Our Mission: Precision & Reliability
We don’t just cut parts—we help cabinet shops and contractors keep their projects moving. Whether you need flat-packed parts, fully assembled cabinets, or custom MDF doors, we provide high-quality craftsmanship and dependable service, so you never have to worry about meeting a deadline.
What Sets Us Apart?
✔️ A Partner You Can Rely On – We’re here to support your business with quality parts, fast turnarounds, and consistent craftsmanship.
✔️ Flexibility to Fit Your Needs – From bulk parts manufacturing to one-off custom cabinetry, we tailor our services to your shop’s workflow.
✔️ Built for Cabinet Shops & Contractors – Whether you need a second CNC for overflow work or a go-to source for parts, we’re the team you can trust.
Let’s Work Together
When your business depends on precision and dependability, Sublime Woodworks delivers. Let’s build something great together.
Contact Us
Interested in working together? Fill out some info and we will be in touch shortly. We can’t wait to hear from you!